EV Rim Repair · Dubai, Abu Dhabi, Sharjah

Rim Repair for Kerbed, Bent and Scratched EV Alloys

We repair cosmetic kerb rash on EV alloy wheels from AED 200 per rim, straighten bent rims from AED 300, and refinish diamond-cut faces from AED 350. Simple scuff repairs on painted wheels can be done at your location; straightening and diamond-cut work happen at our Al Quoz workshop.

Starting priceAED 200 per rimFinal price depends on size, brand & location
Time on site
1–2 hours for cosmetic repairs, same-day or next-day for workshop work
Availability
24/7 mobile
Payment
Cash, card, Tabby, Tamara
Rim Repair on an electric car

Most of the damage we see is kerb rash from tight car park ramps, villa gates and parallel parking along Jumeirah Beach Road. On big EV wheels with thin sidewalls, the rim edge sits close to the kerb, and even a light touch marks it.

Some damage should not be repaired. A cracked rim on a heavy EV is a safety problem, not a cosmetic one, and we will advise replacing it rather than welding it.

What's different on an EV

EV wheels are more exposed and carry more load. Many EVs wear 19–21 inch wheels with 35–45 series tyres, which leave little rubber between the rim lip and the kerb, and aero-style wheel designs often extend the face right to the edge. The Tesla Model 3 and Model Y, Polestar 2 and Ioniq 5 are frequent visitors for this reason.

Weight changes the repair decision. A 2,000–2,500 kg EV puts significant load through each wheel, so a bend that a lighter car might tolerate can cause a vibration at 100 km/h, a slow air leak at the bead, or a tyre that wears unevenly. Cracks are worse: under constant high load and heat, a welded crack can fail. We straighten bends within limits and recommend replacement for cracks.

When you need rim repair

  • Scrapes or gouges on the outer edge of the rim
  • A vibration through the steering wheel after hitting a pothole or kerb
  • A tyre that loses air slowly with no puncture
  • Chipped or peeling paint on the wheel face
  • Corrosion or white powder on a diamond-cut face

How we do it

  1. 01

    Assess the wheel

    We check the rim for bends on a balancer, inspect for cracks, and decide whether the repair is cosmetic, structural or not safe.

  2. 02

    Remove the tyre if needed

    Straightening and refinishing need the tyre off; cosmetic repairs on painted wheels can often be done with the tyre on.

  3. 03

    Repair the damage

    We fill and sand kerb rash, straighten bends with controlled heat and hydraulic pressure, or recut diamond-cut faces on a lathe.

  4. 04

    Refinish and match

    Paint is mixed to match your wheel colour and lacquered; diamond-cut faces are re-lacquered to protect them.

  5. 05

    Refit and balance

    The tyre goes back on, the wheel is balanced and the car is ready.

Kerb rash, bend or crack: three different jobs

Kerb rash is cosmetic. It affects the outer edge and the paint, and the wheel is still structurally sound. We fill, sand and repaint the damage.

A bend is structural but usually repairable. It typically shows as a vibration or a slow leak, and a balancer confirms the run-out. We straighten bends on the inner or outer barrel within the limits the wheel can tolerate.

A crack is a different problem. Cracks often start at the inner barrel after a hard pothole strike and spread over time, sometimes showing only as a tyre that needs air every week. On a heavy EV, we do not recommend welding a cracked rim, because the heat of welding changes the alloy's temper and the repaired area becomes the weak point. A new or used OE wheel is the safer choice.

Telling them apart is the first thing we do. A wheel with heavy kerb rash can be perfectly true, and a wheel with a clean face can be bent on the inside. We spin every damaged wheel on the balancer to measure run-out and inspect the inner barrel with the tyre off before quoting.

Why big aero wheels get kerbed so often

Size and sidewall. A 21-inch wheel on a 35-series tyre leaves only a few centimetres of rubber between the rim and the kerb. On older cars with 16-inch wheels and taller tyres, the sidewall bulge often hit the kerb first and protected the rim.

Car parks add to the problem. Spiral ramps at malls and residential towers, tight bays in Downtown and narrow gates in villa communities leave little margin. Many EV owners kerb their wheels within the first few months.

Tesla aero covers protect the wheel underneath, but the covers themselves crack or scrape. We can tidy small marks on covers; badly broken covers are cheaper to replace.

Diamond-cut and painted finishes

Painted alloys are the easiest to repair. We colour-match the paint and blend it, and most repairs are invisible from normal viewing distance.

Diamond-cut faces are machined on a lathe to give a bright metal finish, then lacquered. Repairing them means re-machining the face, which removes a thin layer of metal, and re-lacquering. There is a limit to how many times a face can be recut, which we check before starting.

Lacquer on diamond-cut wheels can fail in UAE heat and sun, letting corrosion creep under it. If you see white spots or a cloudy face, it is worth refinishing before the corrosion spreads.

When to replace the wheel instead

Replace the wheel if it is cracked, if a bend is too severe to straighten safely, or if the repair cost is close to the price of a used OE wheel. We will tell you which applies, and we will not sell you a straightening job on a wheel we would not put on our own car.

Our limits are conservative because of the load an EV puts through each wheel. A bend in the outer lip of a few millimetres straightens well. A bend that has flattened a section of the barrel, a dent beside the spoke root, or any wheel that has been straightened before in the same spot goes on the replace list. So does any wheel where we find a crack after straightening, which is why every straightened wheel is checked again before the tyre goes back on.

For popular EVs such as the Model 3 and Model Y, used OE wheels are often available in the UAE at reasonable prices. For rarer models, new wheels may need ordering through the dealer. Our EV tyres by car brand pages note the OE wheel sizes, which helps when sourcing a replacement.

FAQ

Rim Repair: common questions

How much does rim repair cost in Dubai?

From AED 200 per rim for cosmetic kerb rash on a painted alloy, from AED 300 for straightening a bent rim and from AED 350 for diamond-cut refinishing. Full refurbishment starts at AED 450 per rim.

Can a cracked alloy wheel be repaired?

It can be welded, but on a heavy EV we do not recommend it. A welded crack can fail under load and heat. We advise replacing a cracked wheel.

Can you repair rims at my home?

Cosmetic kerb rash on painted wheels, yes. Straightening and diamond-cut refinishing need our workshop equipment in Al Quoz.

How long does rim repair take?

Cosmetic repairs take 1–2 hours. Workshop jobs such as straightening and diamond-cut refinishing are usually same-day or next-day.

Will the repair be visible?

On painted wheels, usually not from normal viewing distance. On diamond-cut wheels, the whole face is recut, so it matches.

Can a bent rim cause a slow puncture?

Yes. A bend at the bead seat stops the tyre sealing properly, so it loses a few psi a week with no hole in the tread. Straightening the rim, where it is safe to do so, usually cures it.

Call or WhatsApp · 24/7

Get a price on WhatsApp

Send a photo of the tyre size on the sidewall (for example 255/45 R19) and tell us where the car is parked. We reply with tyre options, a starting price and the earliest time we can come.

050 834 3096
Call now050 834 3096WhatsAppReply in minutes
Chat on WhatsApp